Fiber Optic
By cable type
All Fiber Optic CableLoose Tube CableRibbon and High Fiber CountAir Blown Micro CableADSS and Aerial CableFTTH Drop CableIndoor Fiber CableVocom AI
Vocom International
Connectors and hardware
Fiber Optic Connectors, Patch Cords and Termination Hardware
Patch cords, adapters, MTP/MPO assemblies, terminal boxes and hardened field connectors to finish the cable you source from us, built to order from tier 1 manufacturers. 6 to 8 weeks standard, 2 to 3 weeks by air, and up to 10 weeks for custom builds.
Everything after the cable
- LC, SC, FC, ST, MTRJ
- MTP/MPO 8F to 144F
- OFNR, OFNP, LSZH
- IP68 outdoor
Need a different connector or length? We also build to custom order.
100+
Regions
99.9%
Uptime
25,000+
Clients
24/7
Support
What this range covers
The connectorized side of a fiber build: patch cords for cross-connects and rack patching, adapters and cassette adapters for panels, MTP/MPO trunks and array cables for high-density data halls, terminal boxes for premises and tower sites, and hardened connectors for outdoor field termination. Each item is specified to your connector, polish, jacket rating and length.
Connector types
LC, SC, FC, ST and MTRJ in UPC or APC polish, plus MTP/MPO
Ratings
OFNR riser, OFNP plenum and LSZH jackets, IP68 for outdoor boxes and connectors
Patch cords
Simplex or duplex, 0.9mm pigtail or 2.0mm and 3.0mm jacket, UL listed
MTP/MPO assemblies
Trunks 8F to 144F and array cables 8F to 32F, polarity A, B or C
Adapters
SC, LC, FC, ST and MTRJ, zirconia ceramic sleeve, under 0.2dB insertion loss
Terminal boxes and field
In-house boxes 1F to 4F, IP68 waterproof boxes 2F to 12F, OptiTap compatible connectors
Lead time
6 to 8 weeks standard, 2 to 3 weeks by air, up to 10 weeks for custom builds
From one patch cord to a full data hall
A single cord for a cross-connect, or trunks and cassettes for a whole row. Specified per link and supplied to order.
1F
2F
8F
12F
24F
32F
144F
Browse connectors and hardware
Why source connectors through Vocom
One order with the cable: cords, connectors and boxes specified to match the cable on the same project.
Rated to the pathway: OFNR, OFNP, LSZH or IP68 stated on the order, not assumed.
Lead times that hold: 6 to 8 weeks standard, with 2 to 3 week air freight when a cutover date moves.
Import/export handled: documentation, customs and delivery coordinated.
Founded in 1998: a supplier that also runs networks.
Connectors and hardware FAQ
Which connector types do you supply?
LC, SC, FC, ST and MTRJ patch cords, in UPC or APC polish where the connector allows, plus MTP/MPO trunk and array cables, adapters for each connector type, cassette adapters, SC shutter connectors and OptiTap compatible hardened connectors.
What jacket ratings are available?
Patch cords are OFNR riser rated as standard, with OFNP plenum on LC and SC cords and LSZH on armored cords, LC uniboot cords and MTP/MPO array cables. Outdoor terminal boxes and hardened connectors are IP68 rated.
Do you have options for outdoor and tower sites?
Yes. IP68 waterproof terminal boxes in 2F to 12F for tower and FTTA sites, and OptiTap compatible hardened connectors (IP68, GR-3120, GR-326) for outdoor field termination.
What are typical lead times?
6 to 8 weeks from PO, 2 to 3 weeks expedited by air, and up to 10 weeks for custom builds.
What should I put on the order?
Connector type and polish at each end, fiber type, fiber count, jacket rating, length and quantity, plus polarity for MTP/MPO assemblies and your needed-by date.
Need Connectors Built to Your Exact Spec?
Connector, polish, jacket and length, we can source and build any patch cord or assembly to match your spec.
Talk to a Specifier
